For our 3rd November meeting Paul Batty gave us a session on Overhead Line history, construction and design. The concept originated when Daddylonglegs ran on the pier at Paston Place in 1896 where electricity was supplied parallel to the track on the seabed to be replaced in 1900 by Brighton corporation supplying power.
Of particular interest locally interest was the Lancaster Morecambe and Heysham electrification system which commenced in 1908.It was used as a test bed for various systems of differing voltage and support structures, particularly the West Coast mainline electrification.
Another early user was the London Brighton and South Coast railway; they discounted using a 3rd rail system using a German 6.6kV 25Hz overhead system collecting its power from a contact wire via Bow gear.
Following railway grouping in 1923 a review recommended an overhead line system but Southern continued with 3rd rail. In 1935 LNER were allowed to electrify the Manchester Sheffield route using a Dutch system allowing regenerative braking due to the heavy gradients with a view to providing simplified locomotive haulage. This enabled much heavier coal trains to be handled. A side effect was due to subsidence many crossbeams had to be added to the portal structures. The Woodhead route was doomed as the demands of the locomotives precluded other simultaneous traffic due to overloading the electrical system and the Beeching report only allowing one Manchester Sheffield route via Hope Valley.
A detailed outline of the Great Eastern approach was given as this was completed using a 1500v DC which was replaced by the French 25kV 50Hz AC system including many of those in the rest of England.
Consequently, much progress was made in developing the Uk 25kV OLE using Mark 1 designs which was copper based components. Mark 2 pioneered using galvanised steel supports. The Mark3 introduced a lighter modular headspan system principally for the West Coast north of Crewe. Development continued apace with AWAC catenary, span wires etc.
There are a tremendous number of items which need to be considered in OLE design such as ground conditions, track layout, bridge construction and signalling amongst many more.
The session continued to more technical aspects such as the catenary wire, how the contact wire is supported, OLE layout plan, bonding plans et al.
An explanation was given of how the cable is tensioned using balance weight tensioning and spring tensioning. The use of OLE anchors was explained with several interesting photographs, the science of foundations is an art in itself.
An obvious difficulty is getting the wires around the bends and explanatory diagrams clarified this problem.
This technical section continued covering, pantographs, neutral sections, isolation all being clearly explained by our presenter.
Infrastructure is taken for granted by many people but it is only too clear from the superb presentation that it is a very precise science requiring prodigious skill and expertise. A hearty thanks to Paul for, a wonderful session which I recommend.
Alan Sattenstall 7th nov 2026